OpenLCB Dev Kit
In order to have some standard hardware for OpenLCB developer to work with, we designed the Io boards, and put together a kit of parts:
- 3 x Io by Railstars
- USBCAN adapter by TCH Technologies
- 4 x CAT5 cables
- Serial programming adapter
- USB cable
- ButtonLED board
These were distributed at (below) cost. I still have a (very) few Ios left.
Dev Kit contents.
ButtonLED8 – a small peripheral board, with 8 buttons and 8 LEDs, designed to connect to either the 8 inputs, or 8 outputs, on the Io board. It also could be connected to the 2×5 sockets by a ribbon cable.